Manufacturer LC KSD301 Bimetal Thermostat, Automatic Reset, PPS
Case, Vertical Quick Connectors
*KSD301 Bimetal Thermostat is a small bimetal snap-action thermal protector with shell.
Action principle is that bimetal disc jump at setted temperature,
contact points are closed/opened rapidly to connect/disconnect the
circuit.
A wide range of temperature, low temperature till high temperature,
can be set according to customer requirements.
Cap/Case material, Bracket type/Terminal Orientation/Terminal Size
could be customized based on actual demand.
*KSD301 Bimetal Thermostat Application: Air conditioner, Refrigerator, Water Heater, Microwave Ovens,
Electric Heater, Soybean Milk Machine, VALTOO, Hair Drier,
Fireplace, Clothes Dryer Projector, Shredder, Electric Kettle
Sealing Machine, Toaster, Coffee Machine, Decocing Pot, Water
Dispencer...
* About us.
We're bimetal thermostat factory named Light Country, founded in
1985 in Taiwan.
We have been dedicating on bimetal thermostat switch and rocker
switch for over 35 years.
These parts are widely used in household appliance, electrical
products, industrial facilities, medical devices, etc.
To provide customer best service, we’re with integration of
R&D, production, sales and post-sales as well.
Our factory already got ISO9001, ISO14001, IATF16949 certificates.
Our products already got CQC, UL/CUL, VDE, TUV, SEMKO, NEMKO
certificates, comply with ROHS/REACH regulations.
We promise high quality products, timely delivery, attentive
service, effective improvements.
We believe our switches will enhance your brand power.
* More parameters about our KSD301 Bimetal Thermostat.
| Manufacturer | Light Country(Changshu)Co.,Ltd. |
| Product Name | KSD301 Bimetal Thermostat |
| Type | Single pole, single throw |
| Height of thermostat | 12.4mm |
| Case material | PPS |
| CAP material | Aluminum |
| Bracket | Rotating bracket |
| Bracket material | Stainless steel |
| Terminal material | Copper with tin plated |
| Terminal orientation | 90° |
| Terminal size | 4.75mm(0.187inch) |
| Operating temperature | 0℃~250℃ |
| Differential | 8℃ or more(depend on customer's demand) |
| Electrical rating | 16A/250V, 15A 125V, 10A/250V |
| Endurance | 100,000 cycles or more |
| Circuit Resistance | 50mΩ or less |
| Product Certificate | UL, VDE, TUV |
| Factory Certificate | ISO9001, ISO14001 |
* Common options about case/bracket/terminal types are as below. We
would like to cooperate customer for new design.
*Attentions about KSD301 Bimetal thermostat installation:
1. During thermostat using process, need to avoid moisture and
pollution, otherwise it will affect the electrical performance of
the product. Recommended thermostat working environment is that
relative humidity ≤90%, no contact with corrosive and flammable
things.
2. During installation, need high attention that the
temperature-sensitive surface should not be deformed, and the top
of the cap should not be collapsed or deformed, so as not to affect
the temperature performance and electrical performance of the
product.
3. During installation, need to make sure the thermostat’s
temperature-sensing surface to be evenly contacted with the
temperature-controlling part, and the force should be evenly
applied to stabilize the temperature-sensing. Besides, need to coat
the surface of temperature-sensitive with thermal grease or other
similar heat-conducting medium.
4. During installation, the terminals should not be bent
vigorously, and the connections between terminal and wire should be
in good contact, otherwise the electrical contact reliability will
be affected.
