1. Why choose KSD301 Bimetal Electric Thermostat?
1) High precision, rapid heat transmission, high sensitivity for
excellent thermal protection.
2) Good quality, every product will be tested before shipping,
extremely high temperature pass rate.
3) Easy mounting.
4) Many choices for components used on Bimetal Electric Thermostat,
always support customized production.
2. Parameters and Specification.
| Brand | Light Country |
| Product | KSD301 Bimetal Electric Thermostat |
| Type | Manual Reset |
| Electrical Rating | 15A 125V, 16A 250V, 10A 250V. |
| Operating Temperature | 0℃~150℃ |
| Differential | 8℃ or more(depend on customer's demand) |
| Endurance | 100,000 cycles |
| Cap | Round copper head |
| Case | Phenolic |
| Terminal | Copper with tin plated, 4.75mm |
| Circuit Resistance | Less than 50mΩ |
| Insulation Resistance | 100MΩ or more(DC 500V) |
| Dielectric Strength | AC 1,450V for 1 minute |
| Application | Fireplace |
When using bimetal electric thermostat, recommend to choose
following wires considering rated current:
| Rated current | ≤3A | ≤5A | ≤7A | ≤12A |
| Traverse area | 0.3 mm² | 0.5 mm² | 0.75 mm² | 1.25 mm² |
| UL wire gauge | AWG22 | AWG20 | AWG18 | AWG16 |
| Rated current | ≤15A | ≤20A | ≤30A | -- |
| Traverse area | 2.0 | 3.5 | 5.5 | -- |
| UL wire gauge | AWG14 | AWG12 | AWG10 | -- |
If the picture product could not meet your demand, please refer to
below KSD301 Thermostat Specification, find the style you want, or share with us your detail
requirements, we will support customized production.
3. Attentions about KSD301 bimetal electrical thermostat.
1) Bimetal thermostat manual reset series products can only be
reset after the temperature drops at least 20℃; And when reset, the
force should be moderate, to just can make the thermostat reset as
appropriate (about 5~6N), otherwise there is an impact on the
temperature.
2) When select bimetal electric thermostat, need to confirm the
accurate temperature. To avoid temperature changes caused by
thermal inertia, thermal conduction and other factors, need to
consider the following factors.
a. Detection part of temperature control.
b. Thickness and material of heat transfer component.
c. The power of the heating element.
d. Amount of heated medium.
e. Ambient temperature and air pressure.
3) During bimetal electrical thermostat using process, need high
attention to avoid cracks caused by the large force on the case
inside, and liquid penetrates into the thermostat. Keep the case
clean to prevent the insulation performance from decreasing or even
short circuit breakdown after the thermostat polluted by the
conductive medium.
4. About us.
Light Country Co., Ltd. was founded in 1985 in Taiwan.
We dedicate on KSD301 Bimetal Electric Thermostat and Rocker
switch.
They are highly customized products, widely used in household
appliance, office equipment, industrial facilities, medical devices
and so on.
To provide customer best service, we’re with integration of
R&D, production, sales and post-sales as well.
We've got ISO9001, ISO14001, CQC, UL/CUL, VDE, TUV, SEMKO, NEMKO
certificate, comply with ROHS/REACH regulations.
We promise reasonable price, stable quality, timely delivery and
superior service.
Thanks for your time, please feel free to contact us via below
ways,
Sales: Thomas Lee/Julie Liu
Tel: +86 138 6234 1050/+86 180 2126 2273
Mail: lixin@liangqundianzi.cn or ksd301@aliyun.com.cn
WhatsApp: +86 15850802713
